SUNRISE W4000 and W4700 heavy duty truck wash

We price each SUNRISE in a proforma quotation, prepared at no charge. The quote depends on the gantry (W4000 or W4700), the wash options you choose, such as Hydrowash or the winter drain, and your depot layout. Send us your site details and the vehicles you wash, and the quotation sets out the options side by side.

The W4000 washes a vehicle in 5 to 6 minutes. Your hourly count depends on how vehicles enter and leave the lane. Tell us your daily vehicle count when you request a quote, together with your depot layout, and we size the wash to it in the proforma quotation.

The SUNRISE is a commercial bus wash machine and a truck wash in one gantry. It washes buses, coaches, rigid trucks, vans and trailers. The W4000 handles a washing height up to 420 cm and the W4700 up to 470 cm, both at a washing width up to 285 cm. Send us your tallest and widest vehicle and we confirm which gantry fits.

The W4700 is the taller gantry. It washes up to 470 cm high against 420 cm for the W4000, and its machine height is 560 cm against 510 cm. Both share a 285 cm washing width, a 400 cm rail gauge, 380 V / 50 Hz power and the same two vertical brushes and one horizontal brush.

The standard SUNRISE is a brush wash with two vertical brushes and one horizontal brush, in PE plastic or soft brush. Hydrowash is the brushless option: high-pressure water robots at 20 and 30 bar that sense the size of the vehicle and soften dirt with chemicals first. Tell us which fits your fleet.

Both gantries run on 380 V / 50 Hz, with 3.5 to 4 bar water at 70 to 80 liters per minute and 6 bar air at 15 liters per minute. The optional equipment water requirement is 250 liters per minute. Electricity use is 0.12 to 0.15 kWh per vehicle. Your quotation confirms the connections for your depot.

The machine is 465 cm wide excluding water shields, which add 14 cm on each side, and 510 cm high (W4000) or 560 cm high (W4700) on a 400 cm rail gauge. Send your depot layout, the daily vehicle count and your tallest and widest vehicle, and we plan the lane for your site in the quote.

We do. We install every SUNRISE and provide after-sales service, and our US company, Europe Makine ve Dis Ticaret LLC, installs and services our machines from Greenacres, Florida. Ask about your site when you request the quote, and we go through what the installation needs, including the concrete substructure for the chassis wash.

A winter option is available. An automatic push-button evacuation drains water and chemicals when temperatures fall below +4 °C and rotates the brushes. Tell us your climate when you request a quote, and we include the option in the specification for your depot so the gantry is ready for the season.

Yes. The SUNRISE is modular, so optional accessories are installed without consuming extra space. Options include the Hydrowash brushless wash, the winter drain and hot-dip galvanization. Tell us which you want now and which you may add, and we cover both in the quotation.

Steel router guide pipes, 3 inch in diameter and mounted on the concrete floor, position the vehicle in the lane. A 24 VDC LED traffic light sits at the start of the rail and a second on the machine body. Green means the gantry is ready to wash, and red means it is running or off.

The gantry is built from A1 grade DKP steel with electrostatic powder coating, and hot-dip galvanization is available. Chain-driven energy transmission reduces load on the gearbox and motor. Water runs through galvanized pipes with electrostatic oven paint, on separate lines for rinse water, shampoo and chemicals, with 24 V DC solenoid valves.